Home > Duplex Steel > Duplex Steel 2205 Coils
Chanathip Nickel Alloys & Plates Bangkok is a leading manufacturer of coils from Duplex Steel 2205. The coils are produced under strict quality control with uniform chemical composition, close thickness tolerances, and suitable surface finishes for shaping or further processing.
In the form of hot‑rolled or cold‑rolled conditions, 2205 coils are utilized to produce components requiring superior corrosion resistance and strength. We supply regional and export markets, especially for fabrication into pressure vessel skins, claddings, and marine architectural facades. Tracing of all coils to heat numbers and batch.
Standard ASTM A240 / ASME SA240
Range 5mm To 150mm
Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm.
Surface Finishing Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| 2205 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 – 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 2205 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 116000 , MPa – 800 | Psi – 80000 , MPa – 550 | 15 % |
At Chanathip Nickel Alloys, we take pride in being the largest supplier, exporter, and manufacturer of Duplex Steel 2205 Coils in Bangkok, Thailand, providing cutting-edge solutions for all your piping needs. Our state-of-the-art production plants are strategically located in the Thailand, allowing us to maintain a vast inventory of over 16,000 tons of premium-quality materials readily available in stock. We are dedicated to delivering superior products and services, ensuring reliability and excellence for our global clientele.
Contact us to get a quick quote for your requirement.
Duplex Steel 2205 coils are well suited for round-the-clock production of items such as slitted strips, panels, tube sheets, structural cladding, shipbuilding parts, and architectural facades.They can also be used for pressure lining, chemical plant surfaces, and heat exchanger shells manufacture.
Where the environment exposes them to seawater, acidic or alkaline chemicals, or thermal fluctuation, these coils perform extraordinarily. Factories making HVAC panels, coastal structures, or industrial enclosures take advantage of the high strength and corrosion resistance of the duplex coil. Employing 2205 coils supports efficient forming, bending, and fabricating with minimal wastage.
