Home > Duplex Steel > Duplex Steel Bars
Chanathip Nickel Alloys & Plates produces premium-quality Duplex Steel Bars in Bangkok, Thailand. Our bar products consist of different shapes (hexagon, round, square, flat, etc.) and sizes for process, structural, and industrial applications. Made in Duplex grades (especially 2205 / S32205 / S31803), our bars are precision finished, straightened, and heat treated. We supply to industries like pumps & valves, offshore/marine structures, chemical plants, and industrial fabricators. Each bar is accompanied with material test certificates and mechanical checking, to confirm that it is to a specified tolerance and performance level.
| Duplex Steel Bar Standard | ASTM A276, AMS 5513, AMS 5511, AMS 5647 |
|---|---|
| Duplex Steel Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Duplex Steel Round bar size | Diameter: 3-~800mm |
| Duplex Steel Hex Bar size | 2-100mm A/F |
| Duplex Stainless Steel Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Duplex Steel Square bar size | 4 to 100mm |
| Duplex Steel Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Duplex Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Duplex Steel Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| ASTM A276 Type Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Duplex Stainless Steel Threaded Bar Billet Size | 1/2 to 495mm Diameter |
| Duplex Steel Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Duplex Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| ASTM A276 Type Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| SAF 2507 T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Rolled Duplex Steel Flat Bars Condition | Hardened & tempered, annealed |
| ASTM A276 Type Cold Rolled Bar Technique | Duplex Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Duplex Rod Processing | Bar cutting to 650mm |
| Duplex Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Grade | UNS No | C % | Cr % | Ni % | P % | Si % | S % | Mo % | N % | Mn % |
| S31803 | S31803 | < 0.03 | 21.0-23.0 | 4.5-6.5 | 1.03 max | 1 max | 0.02 max | 2.5-3.5 | 0.08-0.2 | < 2.0 |
| 2205 | S32205 | < 0.03 | 22.0-23.0 | 4.5-6.5 | 0.03 max | 1 max | 0.02 max | 3.0-3.5 | 0.14-0.20 | < 2.0 |
| Grade | YS (MPa) | UTS (MPa) | % Elongation | Hardness(BHN) |
| S31803 | 450 min. | 620 min. | 25 min. | 293 max. |
| 2205 | 450 min. | 655 min. | 25 min. | 293 max. |
At Chanathip Nickel Alloys, we take pride in being the largest supplier, exporter, and manufacturer of Duplex Steel Bars in Bangkok, Thailand, providing cutting-edge solutions for all your piping needs. Our state-of-the-art production plants are strategically located in the Thailand, allowing us to maintain a vast inventory of over 16,000 tons of premium-quality materials readily available in stock. We are dedicated to delivering superior products and services, ensuring reliability and excellence for our global clientele.
Contact us to get a quick quote for your requirement.
Duplex Steel Bars find usage in the production of shafts, spindles, fastener blanks, structural supports, pump and valve parts. Applied in offshore and marine hardware, structural frames, chemical process equipment wherein strength as well as corrosion resistance is needed. Used in flange and coupling making, brackets, and corrosive atmospheres structural joints also. The high strength of Duplex 2205 enables the use of smaller cross‑sections, saving weight and cost with equivalent performance. Suitable for applications in oil & gas, desalination, marine, chemical, and power where corrosion endurance is critical.
